Why doesn’t my HUAWEI phone P10 ring for incoming call notifications?

Why doesn’t my phone ring for incoming call notifications?

Solutions

  • Check whether your phone is set to mute. If this is the case, increase the volume to an audible level.
  • Ensure that a third-party app is not blocking calls. If this is the case, open the app and disable the call blocking feature.
  • Ensure that you have good signal reception. If there is no signal, or signal is weak, find somewhere with good network coverage and try again.
  • Check if do not disturb mode is enabled. If enabled, open the notification panel and touch Do not disturb to disable it.

How to Using your knuckle on HUAWEI Phone P9?

Use a knuckle on HUAWEI Phone P9 to take a screenshot of the whole screen, or part of it.

1 Open Settings, and then select Smart assistance.

2 Touch Motion control > Smart screenshot and turn on the Smart screenshot switch.

Taking a full screenshot

Knock the screen twice with your knuckle to take a screenshot of the whole screen.

Using your knuckle

Taking a partial screenshot

Knock the screen with your knuckle. Keep your knuckle on the screen, drag it around the area you want to capture, and then return to the starting point. Your selection is displayed on screen; the area inside the blue line will be captured. You can also select the screenshot box at the top of the screen for different screenshot shapes. Touch to save a screenshot.

Using your knuckle1

By default, screenshots are stored in Gallery, within the Screenshots folder.

Note:After creating a screenshot, touch Share to share it with friends.

How to Switching text input methods Using HUAWEI Phone P9?

Switch between text input methods as desired.

1 On the text input screen, swipe down from the status bar to open the notification panel.

2 Touch Select input method in the Notifications tab, and then select the desired input method.

If there are no input methods to choose from, go to Settings, touch Advanced settings > Language & input > Default keyboard > Configure input methods, and then turn on the switch next to the corresponding input method.

Huawei Swype input method

Quickly enter words by swiping on the keyboard.

Switching text input methods2

Huawei Swype input supports a wide range of languages.

Switching text input methods1

The Android input method supports a wide range of languages.

Editing text

You can select, cut, copy, and paste text on your phone.

• Select text: Touch and hold the text to bring up . Drag or to select more or lesstext, or touch Select all to select all text.

• Copy text: Select text and touch Copy.

• Cut text: Select text and touch Cut.

• Paste text: Touch and hold where you want to insert the text, and then touch Paste.

• Share text: Select text, and then touch Share to select a sharing method.

Why can’t I connect a device to HUAWEI Phone P9 using the OTG cable?

● Please change to another OTG cable and then try again.

● Please check whether your HUAWEI Phone P9 supports plugging in a microSD card and a USB flash drive at the same time. If it doesn’t support it, it is recommended that you switch to a different phone, because when you connect another phone to your phone using the OTG cable, your phone sees the other phone as a card reader.

P9 using the OTG cable

● If you are connecting a USB storage device to your phone using an OTG cable, your phone will provide power to the device. Some USB storage devices that require a lot of power or which your phone cannot provide power to may not work properly.